LED Wall Lights
Aluminum square Up and down wall lights, power ranging from 2×5W to 2×40W, using CREE COB light source, luminous efficacy 95-100lm/W, CRI≥80 Supports beam angles of 12°/24°/36°/60° and color temperatures of 3000K/4000K/6000K. Compliant with IP65 and IK08 standards, with a voltage of 220-240V and an operating temperature range of -20 to +50℃, it comes with a 5-year warranty.
Request a Quote
Enter the quantity you need and add to your quote list for pricing inquiries.
Description
The Up and Down Wall Lights feature an upper and lower lighting design, taking into account both atmosphere creation and practical lighting. The shell is treated for anti-corrosion and is made of sturdy glass, making it suitable for a variety of environments. The light source has stable performance, high color reproduction, and excellent waterproof and shock-resistant capabilities. It is not easy to be damaged after long-term use and can meet the lighting needs of different scenarios.
The Wall Lights adopt an upper and lower bidirectional lighting design, which can be flexibly combined with upper and lower light sources of different powers (such as 2×5W-2×40W, 1×5W-1×40W), and support multi-beam Angle selection of 12°/24°/36°/60°. The upper light can create a soft environmental atmosphere, while the lower light can provide precise and focused illumination. Whether it is to highlight architectural details or meet the basic lighting needs of the space, it can be efficiently adapted, taking into account both aesthetics and practicality.
The product shell is made of high-quality aluminum and treated with an anti-corrosion powder coating on the surface, which can effectively resist the erosion of rain and moisture. It is not easy to rust or deform after long-term outdoor use, thus extending the product’s service life.
The lamp body is equipped with 8mm thick tempered glass, which not only has good light transmission to ensure uniform and soft light, but also has high-strength impact resistance, capable of withstanding daily collisions and ensuring safe use.
The Up and Down Wall Lights light source adopts CREE COB LED, and the light source quality is stable and reliable. The CRI (Color Rendering Index) is ≥80, which can truly reproduce the color of objects and avoid light distortion. It supports three color temperature options: 3000K (warm light), 4000K (neutral light), and 6000K (cool light), catering to the lighting needs of different scenarios. At the same time, the luminous efficacy reaches 95-100lm/W, with high luminous efficiency and remarkable energy-saving effect.
The product complies with the IP65 waterproof grade standard and has comprehensive dust and water resistance capabilities. It can completely prevent dust from entering the interior of the lamp body, and at the same time, it can resist violent water jets. Even in rainy days, humid environments or outdoor rain scenarios, it can work normally and stably without worrying about water damage. It is suitable for all kinds of outdoor and semi-outdoor scenarios.
Specifications
| Brand | CXB |
|---|---|
| Power | 100W |
| Light efficiency | 210lm/w |
| LED Type | SMD3030 |
| Beam Angle | 158×60° |
| Battery | 12.8V 63AH |
| Mono Solar Panel | 18V 130W |
| Dimensions (mm) | 1868.6×385.5×139 |
| PF | >0.9 |
| LED Lifespan | >50000 hours |
| IP | IP66 / IK10 |
| Lighting Time (Rainy Day) | 7-10 days |
| Solar Charging Time | 6-8 hours by bright sunlight |
| Lighting Mode | 12hrs motion sensor control (Bright lighting 30 secs when people move through the light) + Remote Controller |
| CCT | 4000-5700K |
| Required Pole Size | 60 mm (top end) |
| Working temperature | -25°C to 65°C |
| PIR | 120° > 8m |
| Warranty | 5 Years |
FAQ
Selected LEDs/ COB (chip on board LED arrays):
CXB is honored to work with Cree/ Philips/Osram/Nichia/ Everlight/ Edison/ Epistar on our various products. Only top quality LED direct manufactures and trustworthy suppliers that meet the desired and/or required design specifications would be selectively considered. The LEDs are tested for chromaticity (color) and luminous flux (brightness) and then sorted before package (binning) ready to use as per the product application requirement.
Thermal management:
CXB engineers its products with quality and durability as a top priority. Careful design and consideration goes into designing the appropriate thermal management system to more than adequately handle the heat that is generated at the LEDs and LED driver electronic components to prevent damage and premature failure.
HEAT SINKS are developed and made for each application to maximize the surface area for maximum cooling action.
Specific thermal greases and thermal tapes are used to bridge the path between LEDs/ COB and heat sinks for better heat dissipation.
All of these considerations are made for current and future products in development to make sure that LED performance degradation is minimized over long use of lifetime.
Electronic circuit design:
The PCB (printed circuit boards) are laid out to optimize the available space as well as maintain operating efficiencies. The constant current circuit design is to prevent products from damage caused by unstable input voltage. Some PCBs use FR4 circuit boards while others use aluminum boards when necessary. i.e. all series of T5/ T8 tubes are using aluminum PCBs for better heat dissipation.
Besides, the serial-parallel connection ensures the fact that all other LEDs are still working once one led fails.
Yes, CXB designs and assembles all the products we are selling. Our engineers have abundant knowledge of optics, electronics, mechanical and thermal management, as well as light control technology. Some of them have successful experience to design lighting products for world famous brands. Our basic principle to design internal driver and circuit is safe under EMC/UL list possibility and reliability.
Usually the sample about 3-5 working days, and regular orders in 2 weeks. But it will take a little longer if we have heavy burden of production task. It also takes more time for customized products.
CXB has gained a lot of experience on OEM assembly of all of our LED lighting products with customer logos and labels.
We also want to apply the experience to LED luminaries as we have excellent design and engineering team. Because we have our own CNC processing machines, we can quickly work out prototype for LED fixtures.
We will strictly follow the principal that we won’t disclose or sell customer unique designs or jointly developed products to another third party.
CXB is devoted to innovation in the latest LED technology. We never stop researching new LED lights since the establishment. We keep the valued customers posted of newsletters on the development every week. You can get the news after subscribing in our mail list.
Yes, we have 3 and 5 years warranty for different kinds of products. During the period, if customers have the approval showing product quality issues and if certified by CXB engineers, we would request customers to ship back the failure parts and replace new items with the transportation charge being paid by us.
Downloads
| File | Download |
|---|---|
| CXB-LED-Lights.zip | Download |
